Reference Materials ( 309 )
Featured Resource
Life SciencesDelivers superior airflow at low pressure drop with lower blockage risk in moist air sterile filtration
Delivers superior airflow at low pressure drop with lower blockage risk in moist air sterile filtration
The Entegris Flex Mixing System is a single-use system for the mixing of powders and liquids or liquids and liquids in a sterile, closed system. The mixing utilizes a large peristaltic pump and is effective for mixing solutions up to 200 L.
A comprehensive guide for ordering NOWPak® liner based bottle systems. Includes detailed information on the system components and how they work together to deliver your materials with purity, safety, and process efficiency.
Comprehensive manual provides detailed instructions for proper storage, use, pressurization, installation, and change out of NOWPak® and PDMPak® liner-based bottle systems.
Learn how testing alternate materials and methods can lead to reduced costs and improved outcomes in freeze/thaw processes. Runtime: 58:29
Pre-cleaned, one-ply, heat-sealed PTFE T650 liner in 20-liter and 200-liter sizes for use with NOWPak bottle systems and canister systems used in high-purity solvent and solvent mixes for laboratory and life sciences markets.
Liner-based bottle system with a pre-cleaned, two-ply, heat-sealed PTFE T420 liner.
Replacement PTFE T420 liner designed for use with our NOWPak® liner-based canister and bottle systems. Available in 1-, 4-, 10-, and 19/20-liter sizes.
ErgoNOW ™ connectors support pressure, pressure assist, or pump dispense of chemicals with misconnect prevention and an ergonomic design for ease of use
NOWPak® liner-based canister system closures with their two-piece aluminum design and PTFE seals protect critical materials within filled canister systems.
NOWPak® liner-based canister system closures are available with 63 mm buttress thread and fit 4- to 40-liter canister sizes.
FluoroLine® ultrapure tubing is made from 100% virgin high purity PFA. It is ideal when the utmost purity and chemical resistance is required.
FluoroLine® ultrapure tubing is made from 100% virgin high purity PFA. It is ideal when the utmost purity and chemical resistance is required.
Explains how our AccuSizer® Syringe Injection System (SIS) is designed to meet and exceed all requirements in USP <788> Particulate Matter in Injections test, which is used to quantify the count and size of subvisible particles in parenteral drugs.
A part number guide for selecting the right 55 gallon (200 liter) trilayer HDPE drum.
By creating a completely sterile process from start to finish, our mixing system maximizes simplicity, ease-of-use, and affordability when storing, recirculating, and mixing biopharmaceuticals within a single-use bag.
IsoSciences continues to produce the highest quality isotopically labeled products and to expand its isotopically labeled product offering.
In this short animation, learn how sterile filtration is used in sensitive biotech applications to help deliver pure products with reliable yield. Runtime: 01:26
A part number guide for selecting the right chemical dispense system
This guide delves into the intricacies of filtration within single-use systems.
Pharmsteri™ II PES 液体囊式滤器旨在为终端用户 在关键的液体处理工序中提供高流量和高载量性 能。
Mixers play an essential role during both upstream and downstream processing, specifically in the formulation of media and buffers.
Comprehensive user guide for properly installing the Pharmsteri™ II PES 0.22 buffer capsule filters. Includes product acceptance, installation, wetting, integrity testing, sterilization, troubleshooting, storage and disposal instructions.
IntelliCap™ closures are used together with the NOWPak® liner-based bottle system to seal the bottles after they are filled with chemical.
Entegris Pharmsteri™ II GSV UPE 0.22 µm vent capsule filters are designed to provide end-users with high flow, sterile barrier, and enhance hydrophobicity properties for use in critical gas and vent applications.
应特格Pharmsteri™ II GSV UPE 0.22µm嚢式滤器旨在为终端用户在关键气体过滤和通风口应用点提供高通量，强疏水性，且能作为无菌屏障的滤芯。
Learn how Entegris Blast Freezing Shells add strength, ergonomics, and reliability to Aramus™ 2D Bag Assemblies — even at cryogenic extremes. Runtime: 0:38
When paired with Entegris Plate Freezing Shells, Aramus™ 2D Bag Assemblies become even more robust and reliable, able to withstand falls and impacts even after exposure to cryogenic temperatures. Runtime: 0:37
The MCPA counter connects to your computer via USB cable. On initial connection, your computer will provide 5 V through the USB cable to initiate a connection to the MCPA. However, the MCPA is sensitive to instability on the USB connection (VBUS) that can cause the connection to fail.
ALLpaQ containers are rigid plastic units specifically engineered for the storage and transportation of large-volume liquids.
In this work, we performed series of tests on phosphoramidites with various protecting groups to identify chemically unstable and high energy reactions. These tests identify sufficient safety margin about undesired and potential thermal decomposition.
Single-use systems are gaining traction in life sciences research and manufacturing, but there’s potential for them to adsorb contaminants. In our on-demand webinar “Addressing the Options and Challenges in Subvisible Particulate Contamination Monitoring in Single-Use Systems” presented by Entegris Technology Manager Mark Bumiller and hosted by BioProcess Online, you’ll learn how to use Entegris equipment to monitor and extract particulates from single-use bags and tubing. Register to view now! Runtime: 01:00:02
For over 50 years, we have been committed to solving our customers' most demanding process challenges through a broad solutions portfolio, collaborative and innovative product development, and a focus on science and applications knowledge. Read the facts here.
For over 50 years, we have been committed to solving our customers' most demanding process challenges through a broad solutions portfolio, collaborative and innovative product development, and a focus on science and applications knowledge. Read the facts here.
In this guide, users will learn how to operate the Aramus Aseptic Sampling Bag. This equipment allows users to easily withdraw a 1-3 ml sample from a single-use bag without contamination, while pushing excess sample material back into the original container. Use of the sampling bag helps users preserve sample quality while saving on costs in the most sensitive life sciences applications. Our integrity tested, gamma stable Aramus Aseptic Sampling Bag is always 100% integrity tested to ensure great performance even at extreme temperature -196°C to 121°C (-321°F to 250°F). Runtime: 01:48
Conserve every drop of your high-value samples with the Entegris in-line aseptic sampling system. Runtime: 00:29
Entegris offers a wide variety of customizable solutions single-use bags, tube sets, and manifolds for your high density cell banking and cell and gene therapy processes. Shorten your seed trains with our high quality, freezable, transportable bags. Runtime: 00:30
The Microcarrier Cell Separation system facilitates separation processes via a streamlined, single-use filter/mesh bag system and peristaltic pump. Customize the bag size, mesh size, and pump settings and use our bag for a wide array of applications such as retaining aggregate cells or microcarrier beads, cell washing, and harvest, all while achieving the same or better performance as alternative separation methods. Runtime: 00:30
Entegris' motion bioreactor bags are designed for mammalian and plant culture cell lines with extended mixing times, as well as growing NSO and other cholesterol sensitive clones. Customize the dimensions and ports and be confident that your bag is manufactured to the highest quality specifications. Runtime: 00:30
Aramus™ single-use 2D bags, combined with the Entegris plate freezing shells, provide an easy-to-use, ergonomic, and reusable secondary container for high throughput plate freezer systems to enable rapid freeze-thaw workflows.
Aramus™ single-use 2D bags, combined with the Entegris blast freezing shells, provide an easy-to-use, lightweight, and reusable secondary container solution for use with controlled rate convection or standard lab cold-wall freezers.
Entegris offers cleanable, metal freezing shells for use with any commercial, controlled rate plate freezer for bulk drug freezing applications.
Entegris offers lightweight, plastic freezing shells for use with static, blast, ULT freezers, and controlled rate freezing chambers for bulk drug freezing applications.
From bioreactor harvest to cryopreservation, Aramus completely closed banking manifolds provide convenient fill and storage in liquid nitrogen vapor.
Amanda Olson, technical writer for AMH instrumentation at Entegris, talks about our Mini DLS online particle sizing system. Watch the video to learn what makes the Mini DLS a vital and interesting technology both for its designers and our valued customers. Runtime:03:14
Entegris cassette and overwrap solutions allow you to protect and store your high value product in liquid nitrogen applications.
Our bioprocess powderbags are an ergonomic, robust, closed solution for convenient filling, handling, storing, and transferring of powders used in media, buffer solutions, and active pharmaceutical ingredients (APIs).
Pre-cleaned, polyethylene diptube assembly for NOWPak® liner-based canister systems
Novel therapeutics often rely on advanced blast freezing technologies, but it can be difficult to develop processes around complex freeze/thaw operations. As experts in cold-chain and blast freezing research, Entegris and FARRAR™ offer this on-demand webinar as an opportunity for users to improve their understanding of emerging technologies and techniques. Runtime: 01:09:41
The “tail” of a particle size distribution refers to particles several standard deviations removed from the mean of the standard Gaussian distribution. It can have a significant effect on product quality and performance.
Learn how to select sterile filtration solutions for single or multi-use life sciences applications with Cris Rios, Senior Field Applications Engineer. Entegris’ science-driven data helps implement optimized filter selection without the risk of compromising sterility in your products. Runtime: 02:07
It’s difficult to scale cell and gene therapy production using all-in-one processing systems. That’s because the budget level and personnel required may make it cost-prohibitive to increase capacity. In this webinar, we’ll discuss the benefits of a decentralized manufacturing strategy. Using a real-life case study, we’ll demonstrate how this approach can help users scale from lab to commercial levels. Runtime: 31:25
See how to select the best filters for your life sciences application with Chris Rios, Entegris Senior Field Applications Engineer. Understanding the choices between membrane properties will help optimize compatibility and performance in your process. Runtime: 01:30
Find out how to select a prefilter for sterile filtration applications and recognize the advantages between various membrane morphologies with Chris Rios, Entegris Senior Field Applications Engineer. Runtime: 01:17
Discover how to minimize product loss from hold-up-volume in scale-up activities with Cris Rios, Senior Field Applications Engineer. Entegris’ sterile filter designs minimize product loss in life sciences applications at each each stage of development and production. Runtime: 00:56
Tubing material reference document for use in Life Sciences upstream and downstream applications.
This validation guide addresses key requirements needed to validate Aramus™ bag assemblies for use in regulated applications. It contains sourcing, testing, and regulatory compliance summaries that validate Aramus bag assemblies meet those requirements.
Entegris provides a wide range of particle size and count solutions to any business manufacturing or using silica suspensions.
Made from a high-grade, gamma-stable fluoropolymer that maintains mechanical integrity in frozen applications to -85°C, our Aramus™ single-use 2D bag assemblies provide higher purity, greater compatibility, and increased safety for critical process fluids and final products.
Discover how Entegris can help achieve end to end process excellence with our single-use solutions.
Keep product control in your hands with our quick-turn custom manufactured solutions for specific bioprocessing applications. We have solutions for secure fluid transfer, aseptic filling, sterile processing or storage, bioreactor filtration and support, and much more.
This video introduces the Mini DLS system, an online particle measurement solution that sits diverts samples from your process stream to provide data in near real-time.. Runtime: 01:50
Detailed overview of our AccuSizer® A7000 SPOS systems designed as liquid particle counters for contamination applications or as sophisticated particle size analyzers of suspensions.
Entegris Double Chime Low Residual Drums are designed for sensitive materials critical to the semiconductor, storage, flat panel display, and life sciences industries. They provide the highest standard of purity and reliability while minimizing wasted chemistry..
ND-CD series pressure dispense connectors provide a clean, convenient, and completely sealed method for dispensing chemicals from NOWPak® canisters.
As shown by the global rollout of the COVID-19 vaccine, the cold chain is a critical part of the pharmaceutical supply chain. How can we make it work better? In this webinar, presented by BioProcess Online and sponsored by Entegris, we’ll demonstrate how emerging technologies can make the cold chain safer and more reliable while improving patient outcomes. Using our quantitative analyses, you’ll understand how controlled-rate shelf freezers, single-use bags, reusable protective shells, and ergonomic workflow solutions can help meet critical end-user objectives. Runtime: 33:49
Getting real-time data from an online source is vastly more efficient than sampling the process stream and using an offline laboratory. With precise online measurement, process changes can be made in minutes rather than hours or days.
Entegris introduces the Mini DLS system. This technology, powered by dynamic light scattering, lets users eliminate hours of work in offline labs. Use real-time results to improve quality and performance. Runtime: 01:00
In August of 2023 Entegris released AccuSizer® software version 3.1.4.0 that includes several new features.
The Entegris AccuSizer is the most accurate and high-resolution particle sizing technique used to characterize powders for AM.
Pharmsteri™ polypropylene cartridge filters provide economical filtration for removing particulate and colloidal contaminants in various pharmaceutical as well as food and beverage applications.
Additive manufacturing (AM), or three-dimensional (3D) printing can be performed using various materials including liquid resins, polymers, and powder metals. When using polymers and metal powders, the particle size distribution is important for processability and final part quality. The powder particles act as building blocks, and their size affects the packing density, surface area, and flowability of the powder bed. A variety of particle size analysis techniques can be used to determine the powder size distribution, including laser diffraction and single particle optical sizing (SPOS). This webinar will explain the advantages and disadvantages of both techniques and provide examples of results and data interpretation. Runtime: 58:42
This quick start guide provides a procedure for cell banking.
This application note examines the benefit of using fluoropolymer film for the handling and storage of high value oligonucleotides-based payloads such as ssDNA aptamer and its applications in precision biological engineering/synthetic biology, in vitro diagnostic and medical space industries.
Constructed of PTFE pleated membranes with polypropylene (PP) supports, these filters provide unmatched durability and cleanliness in point-of-tool and dispense applications involving solvents, DI water, and dilute acids and bases.
This video will show you how utilizing high-density cell banking workflows in combination with your already intensified upstream process can further enhance your process productivity while reducing contamination risks. Runtime: 11:31.
High-density cell banking (HDCB) involves freezing high concentrations of cells in large single-use bags. It increases productivity and reduces manufacturing costs by eliminating intermediate steps. HDCB also reduces the risk of contamination and the number of consumables needed, while enabling rapid cell recovery and high viability.
Learn more about how Entegris supports each stage of life sciences manufacturing.
This webinar will examine the advantages of fluoropolymer film as material of choice for the storage and development of high value oligonucleotide-based payloads such as an ssDNA aptamer. Nucleic-acid-based therapies, such as DNA, antisense oligonucleotides, small interfering RNAs (siRNA), aptamer probes, and messenger RNA (mRNA), have been widely used in diverse biomedical applications. Runtime: 54:28
Our robust 3D multilayer bioprocess assemblies are sterilized using gamma irradiation and can be integrated into a variety of large volume single-use biopharmaceutical applications. Customization is available.
The preparation of new biologically active entities has generated immense study in the field of phosphorylation. Here is a mini review.
Savana® 334 PTFE cartridge filters are constructed of PTFE pleated membranes with polypropylene supports to provide durability and high flow performance for filtration of process fluids in electronic industry.
NOWPak® Liner-based Canister Systems provide safe and efficient delivery of critical process materials. 4 to 200 liter sizes.
Bioprocessing for monoclonal antibodies (mAbs) and other life sciences modalities relies on effective and efficient sterile filtration processes to remove contaminants that compromise product purity and yield in both small-batch systems and rapid large-scale manufacturing.
In this webinar, Chris Rios, Entegris senior field applications engineer, discusses how filtration manufacturers optimize materials for performance and integration within single-use systems, where product performance and quality are vital.
This guide walks you through the steps for making zeta potential measurements using our Nicomp® DLS system. Guide includes software setup, sample measurement, sample preparation, and system verification.
The NS60 liner conforms to the interior of the canister minimizing stress improving liner strength and durability and maximizing chemical fill volume.
NOWPak® Liner-based Canister Systems provide safe and efficient delivery of critical process materials. 4 to 200 liter sizes.
This Pharma IQ report looks at the ways pharmaceutical companies can improve their manufacturing processes and make efficiencies, from the concept stage through to market.
This validation guide addresses key requirements needed to validate Pharmsteri™ II PES 0.22 buffer capsule filters for use in regulated applications. It contains sourcing, testing, and regulatory compliance summaries that validate Pharmsteri II PES buffer capsule filters meet those requirements.
This material is a high-purity precursor for surgical wound closure products in medical and veterinary applications.
Detailed listing of the various films our single-use assemblies are manufactured from. Ask our materials experts which film is best for your unique application.
This comprehensive user manual instructs users on properly unpacking, filling, freezing, storing, handling, and shipping Aramus™ standard bag subassemblies and full assemblies. Includes safety, warranty, and terms and conditions of sale.
Entegris is your partner in delivering innovative specialty chemicals to develop and provide advanced optical materials for enhancing vision.
Comprehensive user guide for properly installing the Pharmsteri™ PES disposable filters. Includes product storage, installation, flushing and wetting, integrity testing, sterilization, replacement, and disposal instructions.
This Cold Chain Guidance Tool is an interactive learning experience that identifies areas of interest based on the users specific operations. Entegris guides the process of configuring freeze/thaw (F/T) solutions for biologic treatments and therapies based on your specific scenario and needs. Our Life Sciences Technology Center provides everything needed to make educated decisions about what freezing process and products best fit your needs.
Entegris provides useful solutions in every step of oligonucleotide manufacturing. We enable ultra-high purity, high-yield processing that allows cost-effective commercialization of RNA therapeutics.
Mark Bumiller, technology manager, and Joy Xiaohui Chen, senior application engineer, discuss particulate contamination as an important consideration in pharmaceutical production, and even more so in bioprocess production and delivery as well as in ophthalmic applications.
This application note explains how, compared to conventional small-scale cell harvesting methods, Entegris' microcarrier and cell separation system can effectively separate cells from microcarriers and provide maximum cell recovery.
Learn how applying technologies and filtration expertise to your LVP/SVP process will remove risks and ensure peace of mind by enabling more rigorous process control to improve sterile drug quality.
This application note demonstrates the success use of functionally closed, single-use systems to overcome steam sterilization challenges and deliver process flexibility while reducing risks.
Features a range of sensors based on the single particle optical sizing (SPOS) technique to measure particle size and concentration. When used with our AccuSizer® SPOS systems you can monitor contamination and analyze high concentration particle sizes of CMP slurries, aggregated proteins, and more.
Comprehensive user guide for properly installing the Pharmsteri™ PES and PTFE cartridge filters. Includes product storage, installation, flushing and wetting, integrity testing, sterilization, operating, and cleaning instructions.
Comprehensive user guide for properly installing, operating, maintaining, and troubleshooting our InVue® GV148 liquid chemical concentration monitors.
Comprehensive manual provides detailed instructions for proper handling, refurbishing and filling, maintenance, and operation of NOWPak® liner-based canisters.
Our life sciences graphite grade materials are easily machined into precision parts, and are ideal for mechanical components in medical devices.
Our portfolio of ultrasonic graphite grades are ideal for use as matching layers for today's highest-performance transducers and backing blocks, providing a material advantage to manufacturers and operators of ultrasound transducers.
Our Life Sciences Technology Center is your gateway to cutting-edge freeze/thaw technology and support. We provide everything needed to make educated decisions about what freezing process and products best fit your needs.
Join Ross Acucena, applications director, Life Sciences in this webcast learn about facilities and infrastructure to design and deploy optimized freeze thaw workflows, single-use systems protect the integrity, efficacy, and purity of your product, and capabilities to support your achieving critical clinical development and commercialization objectives.
Aramus™ shaped 2D single-use bags are available in custom shapes, sizes, and assembly configurations. Configurable bag envelope geometries enable very small processing and storage volumes while maintaining strength and reduced particle count.
Entegris is your partner in delivering innovative specialty chemicals to enable pharmaceutical development and manufacturing. Our specially tailored formulated chemistries are expertly designed for oligonucleotide and small molecule drug manufacturing.
This application note shows several examples where the Entegris AccuSizer® SPOS system is ideal for determining if the final inkjet ink contains any over-sized particles that pose a risk for clogging jets and causing other reductions in performance during inkjet ink manufacturing.
Learn how applying technologies and filtration expertise to your wine process will remove risks and ensure peace of mind by enabling more rigorous process control to improve wine quality.
Informational technical note intended to prepare customers for properly installing a new AccuSizer® Mini single particle optical sizing (SPOS) system.
Through recent case studies and analytical technology data, this webinar hosted by Global Engage discusses recent trends and challenges in (disposable) materials and technologies used in the decentralized biopharmaceutical industry. Runtime: 43:42
This collaborative report from Pharma IQ and Entegris, tackles the key cell and gene therapy challenges facing the pharma industry, and identifies solutions that help accelerate development and time to market, as well as improve scalability and affordability.
The cannabis industry is growing rapidly with the legalization of cannabis products in much of the world. This application note focuses on cannabis infused beverages and the use of DLS and SPOS technology to determine optimum formulation and emulsification processing.
The application note explains liposomes and how they are used in the pharmaceutical industry as a drug delivery system for transport of chemotherapeutic drugs to the tumor area.
This technical note outlines requirements for properly installing our AccuSizer® SIS, AD, and APS systems, as well as our Nicomp® DLS system.
This flyer explains the many reasons why your next dynamic light scattering (DLS) system should be a Nicomp® DLS system, such as the nano-sized particle measurements from 0.3 nm to 10 μm, and the proprietary high resolution multimodal deconvolution algorithm that can resolve close bimodal distributions.
Our portfolio of Nicomp® and AccuSizer® advanced particle count and size analyzers provides high resolution and accuracy in CMP slurries and other suspensions, enabling customers to perform particle size analysis both in the laboratory and online, in real time, directly in the fluid stream process.
This technical note explains what automatic dilution is and how the option eliminates the chance of operator error and facilitates generating optimum results with our Nicomp® DLS system.
This application note describes the properties of gold nanoparticles and the most popular analytical techniques available for particle size and zeta potential analysis.
This paper details the various USP subvisible particulate matter tests available to assure the minimization of particle counts in intravenous injections. And it explains how Entegris AccuSizer® and Nicomp® systems are uniquely capable solutions for performing these tests in injections, ophthalmic solutions, and lipid emulsions.
This technical note documents proof that out Nicomp® DLS system is capable of repeatedly measuring particle size below 1 nm and provides details on how the measurements were performed.
This flyer explains the many reasons why your next dynamic light scattering (DLS) system should be a Nicomp® DLS system, including it generates great data and it is uniquely capable of determining when multiple peaks are present and can resolve peaks closer than any other DLS system.
This application note summarizes how the Nicomp® DLS system can be used to study and control nanoparticles used for drug delivery.
This application note explains why dynamic light scattering (DLS) is the preferred method for particle size and zeta potential analysis of abrasives used for CMP slurries, and why single particle optical sizing (SPOS) is the preferred technique for determining LPC tails in abrasives and final CMP slurries.
This application note explains using Microfluidizer® technology to reduce the size of emulsions/suspensions and analyzing the size reduction process using a Nicomp® dynamic light scattering (DLS) system, which proved an easy, effective instrument for tracking the size reduction by the Microfluidizer.
Explains how our Nicomp® Nano DLS system can be used to estimate the average molecular weight of particles or macromolecules suspended in solution using the technique of dynamic light scattering (DLS).
Subvisible particulate testing is critical to assess the safety of medical devices, and particulate contamination should be minimized to avoid possible negative health consequences to the patient. A wide range of standards, USP tests, and FDA guidance documents provide test methods and acceptance criteria for particulate contamination in medical devices. In this webinar, Mark Bumiller discusses solutions to help meet these critical qualification requirements.
This application note explains how the USP <729> test is used to determine critical size characteristics of injectable lipid emulsions, and how our Nicomp® DLS system and AccuSizer® SPOS system are ideal solutions for achieving reliable results.
This technical note explains how scattering angle influences results generated for particles around 20 nm in size using Nicomp® DLS systems.
In this webinar, experts from materials supplier and contract manufacturing organization walk through a case study that evaluated single-use bag material interaction and adsorptive relationship with AAV viral vector during storage.
This technical paper explains how partnering with a vendor experienced in navigating regulations and validating new materials can help safeguard your treatments in a bioprocess manufacturing and supply chain ecosystem.
Provides an overview of our SemiChem APM 200 series advanced process monitor portfolio that automatically samples, analyzes, and reports quantitative chemical concentration of critical CMP and formulated cleaning chemistry processes.
This paper discusses the results of a frozen shipping study of single-use fluoropolymer bags conducted following new guidelines that help to mitigate the risks during frozen shipping and ensure consistent product quality in cold chain.
This animation shows how our single-use mixing system creates a completely sterile mixing and recirculation process, ensuring your buffer and media are mixed correctly and efficiently. Run time: 01:30
This webinar reviews key requirements and considerations for the freezing of bulk drug substances or APIs, examines the properties required of a 50mL to 50L scalable system, and evaluates a model protein stability study to determine optimal freeze/thaw solutions
Made from a unique fluoropolymer, Aramus™ 2D single-use bag assemblies are made to withstand temperatures as low as -196°C (-320°F). This video demonstrates the bag's reliability in a frozen drop test comparing the fluoropolymer bag to a polyethylene bag. Runtime: 03:07
This application note explores the growing purity needs in single-use systems used in pharmaceutical and biopharmaceutical industries, and analyzes particulate contamination levels in Aramus™ bag assemblies using the AccuSizer® SPOS system.
This technical note explains how to select particle size standards to verify and validate dynamic light scattering (DLS) instruments used in life sciences laboratories.
Facilitate the microcarrier separation process with our streamlined, completely sterile, single-use filter/mesh bag system.
SmartCap™ closures are used together with the NOWPak® liner-based Bottle System and PDMPak® Bottle System for Pressurized Applications to seal the bottles after they are filled with chemical.
A part number guide for selecting the right 55 gallon (200 liter) trilayer HDPE drum that is designed specifically for the Asia/Pacific market.
A part number guide for selecting the right 55 gallon (200 liter) Advantage trilayer HDPE drum that is designed specifically for the Asia/Pacific market.
This paper discusses the cold-chain supply scale-up challenges that can threaten product integrity during freeze/thaw, storage, and shipping, and the importance of empowering manufacturers to implement efficient, cost-effective solutions.
Detailed procedures for capping and torquing SmartCap™, NC-W1, NC-W2, and IntelliCap™ closures on NOWPak® bottle systems.
Learn what material has the widest temperature profile from +200 to -200°C, and watch the results of mechanical strength, cold crack and freeze/drop testing.
This article reviews a case study that evaluated single-use bag material interaction and the adsorptive relationship with AAV viral vector during storage. The experimental methods, analytical approach, and results present a frame of reference for selecting tools and materials.
This paper examines single-use supply constraints that interfere with bioprocess operations and have been exacerbated by the COVID-19 pandemic and highlights Entegris solutions that can help minimize production delays.
We offer freezing shells for use with Aramus™ single-use bag assemblies to provide greater bulk drug substance (BDS) protection during handling, more consistent freezing/thawing, and reduced storage density.
SmartCap™ closures safely seal our NOWPak® and PDMPak® liner based systems after they are filled with chemical. These closures feature a chemical-specific mechanical key code that mates with our ErgoNOW? connector to prevent unsafe chemical mixing.
SmartCap™ closures are used together with the NOWPak® Liner-based Bottle System and PDMPak® Bottle System for pressurized applications to seal the bottles after they are filled with chemical.
To address the current concerns of manufacturability, however, a material’s commercial viability should also be discerned to ensure process economics at scale. This webinar will allow manufacturing and process professionals to: review key product contact material requirements and available data, examine storage and cryogenic process compatibility with respect to functional performance, and consider the case study of a material used in storage applications at commercial scale.
Join Joy Xiaohui Chen, senior applications engineer for Entegris and Cari Sadowski, Principal Scientist for Fujifilm Diosynth Biotechnologies. in this webcast as they walk through a case study that evaluated single-use bag material interaction and adsorptive relationship with AAV viral vector during storage.
Entegris provides transformative, quick-turn bioprocess solutions. Customized single-use and full-scale solutions include motion bioreactor bags, 2D and 3D bag assemblies, microcarrier separation systems, mixing systems, and tube sets and manifolds. Runtime: 01:26
Join Mark Bumiller, technology manager, as he explores the analytical techniques used for nanoparticle characterization and its growing significance in novel drug delivery systems. Register for the webinar today.
Ross Acucena, applications director, and Donnie Beers, product manager, introduce our tube sets and manifolds that enable integrated single-use assemblies. We custom design solutions that fit the single-use system to your process and help reduce validation time. Runtime: 02:50
Ross Acucena, applications director, and Donnie Beers, product manager, introduce our highly functional and adaptable microcarrier cell separation bags designed for single-use processes. Separating microcarrier beads from adherent cells is accomplished in one simple step. Our economical, customizable bags can handle cell culture volumes from 500 mL to 50 L. Runtime 02:34
With the explosion of clinical trials expanding cells for new treatment modalities such as cell and gene therapies, motion bioreactors are in very high demand. Ross Acucena, applications director, and Donnie Beers, product manager, introduce our adaptable, motion bioreactor bags that can be configured for most rocking or motion platforms. Runtime: 03:26
Comprehensive listing of our reliable, cost-effective slurry process monitoring solutions that provide a line of defense to prevent defect-causing contaminants in current and new technology nodes.
This application note explains how our AccuSizer® SIS liquid particle counter automates measuring and reporting particle size and count, often making the analytical measurements easier for testing particulate contamination in medical devices than following a range of standards, USP tests, and FDA guidance documents.
Entegris’ chlorophosphines are starting materials to phosphine and phosphinite ligands for optmizing asymmetric hydrogenations and various cross coupling reactions including C-C, C-N, and C-O bond formations.
This white paper discusses three types of process data analytics that can help ensure high CMP yields: electrochemical analysis during blending, in-line process chemistry monitoring, and particle sizing determination.
Video introduction of our AccuSizer® SPOS systems comprising high resolution and high concentration particle counters that accurately determine particle size and counts at the tail end of your distributions.
Video introduction of our Nicomp® DLS systems that use dynamic light scattering (DLS) technology to provide high sensitivity, high resolution size, and Zeta potential of sub-micron particles.
Entegris has a unique, versatile, and practical organophosphorus based/derived reagent portfolio including key intermediates for pharmaceutical and industrial applications and phosphazene super bases that facilitate delicate deprotonation reactions.
The InVue® GV148 liquid concentration monitor delivers real-time process fluid concentration measurements for chemical blending, spiking, and dilution without process intrusion or interruption.
Listen as Ross Acucena, applications director, explores the uncertainty and complexity of single-use technology material performance and system design in cold temperature and cryogenic operations, and the solutions available for success.
This application note determines the cryogenic compatibility of our Aramus™ single-use bag assembly material through freeze and drop testing after 24-hour minimum immersion in the liquid nitrogen vapor phase.
Ideal for simple, quick, and efficient filtration of fluids used in laboratory, pilot, and small-scale applications, including clarification of acids, bases, and solvents.
This paper intends to help define nanoparticles, their various uses, and the analytical techniques used for their physical characterization, include dynamic light scattering (DLS) technology.
Learn about USP standards for testing subvisible particulate matter in parenteral drugs, proteins, ophthalmic solutions, and the sizing of lipid emulsion droplets in this webinar with Mark Bumiller, Entegris technology manager.
View this video to hear John Lynch, Entegris Vice President of Life Sciences provide an overview of Entegris' Life Sciences Business.
Detailed description of our AccuSizer® A7000 SIS system, which is not just a liquid particle counter; it is a sophisticated particle size analyzer as well, and is the most advanced instrument available for USP <788> testing.
Explains how our AccuSizer® A7000 SIS syringe injection system is designed to meet and exceed all requirements in USP <789> Particulate Matter in Ophthalmic Solutions test, which is used to quantify the count and size of subvisible particles in eye care products.
This sophisticated particle size analyzer is the most advanced instrument available for USP <788> testing. It meets or exceeds all requirements for USP <788> by providing size and count data at the required 10 and 25 µm.
Fluorogard® all-PTFE liquid filters offer cost-effective filtration solutions for advanced WEC processes and elevated temperature applications. Ideal for medium- to high-flow extended lifetime applications, these high-retention filters remove particles from a wide range of acids, bases, and other process chemicals.
Safe and secure single, double, and triple barrier cell culture bags are customized to your most exacting specifications.
Customized 2D barrier bag systems and 3D multilayer assembly bags for upstream and downstream applications.
Pictorial illustrating how high-density cell banking with Aramus™ bag assemblies accelerates the upstream process by reducing seed train processes by several weeks, increasing yield while reducing contamination risk.
This technical paper explains how single-use, fluoropolymer bag assemblies increase both cell culture volume and cell density per mL while preserving cell viability during freezing, storage, and thawing steps, and why they present an efficient alternative to vials in a variety of upstream cell banking applications.
In this previously recorded webinar, we share risk mitigation study data showing the utility of low temperature suitable materials and packaging, employment of sensors for monitoring shipments, and better qualification and evaluation through simulated standards and real-world transit.
This technical note features our user-friendly software package version 3.0 for the AccuSizer® family of laboratory particle size and count analyzers. It explains the thorough features and operations testing conducted prior to the version release as part of our quality assurance protocol.
In this webinar, Janelle Rupkalvis, applications engineer for Entegris and Alex Kakad, product marketing manager for AdvantaPure/New Age Industries discuss the needs and changing requirements of standard equipment and processes to handle lower temperatures.
Certain AccuSizer® SPOS systems perform exponential autodilution while providing accurate concentration information. This technical note explains how single-stage automatic dilution works.
L’utilisation des systèmes à usage unique (UU) ne cesse d’augmenter,tout comme les problèmes de pureté des composants àusage unique (UU) et leur incidence potentielle sur les produitsfinis à haute valeur ajoutée.
Die Nutzung von Single-Use-Beuteln nimmt weiter zu,ebenso die Sorge um die Reinheit der Einwegkomponentenund deren mögliche Auswirkungen auf hochwertige Endprodukte
Life Science Series: Jonathan Cartoux & Janelle Rupkalvis, Entegris applications engineers, share insights from a CPE Lyon University collaboration that demonstrates the cryoresistance advantages of fluoropolymer 2D single-use bag assemblies.
Entegris Aramus™ products are constructed from polymers that are resistant to a variety of chemicals. Find a detailed chemical compatibility list here.
Detailed instructions for properly flaring and assembling Cynergy® clamp-to-FlareLock® II adapters.
This flyer explains the many reasons why your next particle analyzer should be an AccuSizer® SPOS system, including accuracy, concentration, and resolution benefits.
In collaboration with CPE Lyon University, Entegris demonstrates the fluoropolymer Cryo resistance advantage of the Aramus™ 2D single-use bag assemblies in cold-chain cell long-term storage.
This technical note explains testing performed to determine chemical compatibility of the Aramus™ bag material via mechanical testing (burst and tensile strength) after exposure to 100% DMSO after different lengths of time at room temperature.
Provides detailed instructions for properly cleaning the AccuSizer® A2000 SPOS system to ensure optimal system fluidics and sensor performance.
This pictogram illustrates the positive impact switching to single-use, single-layer fluoropolymers for bioprocessing can have on maintaining product safety, consistency, and shelf life at cold temperatures.
Janelle Rupkalvis, Life Sciences applications engineer, explains the importance of having a complete, cold-resistant solution of bags, tubing, connectors, and shells to protect frozen BDS and reduce your risk during shipment and storage. Runtime: 03:50
Janelle Rupkalvis, Life Sciences applications engineer, walks through our quick-turn service for designing custom, single-use solutions that meet customer-specific requirements for unique, cold-temperature applications. Runtime: 02:44
Discusses why the AccuSizer® SPOS system is ideal for testing filters and performing a wide range of filtration efficiency experiments in various industries including semiconductor and life sciences.
This paper reviews different analytical techniques for particle size analysis, and is intended to help scientists new to particle size analysis understand their various strengths and weaknesses in order to select the proper technique for their samples.
This technical note guides customers through the suggested procedures for regular calibration testing and particle count accuracy of our AccuSizer® SPOS system to verify that the system is working to specification.
The sensor is the most critical component in a liquid particle counter since this is where the actual measurement takes place. This technical note defines sensor resolution and provides example of performance data for the LE400 sensor, which is used in our AccuSizer® SPOS systems.
This application note investigates the effect silicone oil droplets have on subvisible particle counts in therapeutic proteins and parenteral drugs reported using our AccuSizer® SPOS liquid particle counter.
This technical note provides guidance for how to determine the proper time for analyzing submicron particle size when using our Nicomp® DLS system.
This application note introduces the analytical techniques available to guide the study of how to create stable emulsions, and address the use of dynamic light scattering (DLS) and single particle optical sizing (SPOS) technologies to accurately measure the size and stability of emulsions.
This application note explains using single particle optical sizing (SPOS) technology to measure both the size and concentration of aggregated proteins, and how our AccuSizer® SPOS system excels at quantifying smaller aggregates in the range of 0.15 to 2 microns.
The application note explains how to determine the isoelectric point (IEP) of a dispersion, which is the pH value at which the zeta potential equals zero, and why the Nicomp® ZLS system is the ideal solution for making this determination.
This technical note outlines three effective cleaning methods for removing particles that may have become absorbed onto the inner glass surfaces of the flow channel in the precision optical flow cell in the AccuSizer® FX Nano sensor.
An important question when using a particle size analyzer is how much of a sample needs to be measured to properly define the resultant size distribution. This technical note addresses this question both mathematically and experimentally.
This application note discusses aggregations in proteins and methods for measuring the degree of aggregation using our Nicomp® DLS system.
This white paper addresses the concerns of development laboratories, contract manufacturing organizations (CMOs), and contract research organizations (CROs) and explains several factors they should consider when expanding operations and selecting single-use systems for cold-chain bioprocessing.
This technical note presents data generated at customer request to prove the size, count, and volume accuracy of our AccuSizer® SIS/syringe injection sampler system.
This technical note documents proof that our Nicomp® DLS system is capable of repeatedly measuring 0.1 mg/mL lysozyme and provides details on how the measurements were performed.
In this recorded webinar, Mike Johnson, director R&D engineering of Entegris and Johannes Kirchmair, CEO/Founder of Single Use Support (SUS), presented single-use bag system technologies for freeze/thaw applications in bulk drug substance (BDS) manufacturing.
A part number guide for ordering the right 55, 30 or 15 gallon PFA composite drum.
This application note explains the pioneering work performed at Bind Therapeutics Inc., to incorporate in-line dynamic light scattering measurements into the manufacturing process of their Accurins® nanoparticle drug candidate.
This application note explains how the AccuSizer® particle size and concentration analyzer is uniquely capable of detecting the few large particles at the tail of the distribution in CMP slurry that can be harmful during the CMP process.
This technical note guides a Nicomp® DLS system user through the various steps that may be required to generate accurate and repeatable results.
The AccuSizer® SPOS system is both a liquid particle counter and a high resolution particle size analyzer. This technical note shows typical results from the AccuSizer system, and explains how to interpret the data generated.
This technical note provides guidance to customers in the pharmaceutical industry using the dynamic light scattering (DLS) particle size analysis technique for release testing drug products in the submicron region.
This application note explains how particle size and zeta potential measurements can be used to enhance dispersion stability.
This technical note describes how the single particle optical sizing (SPOS) technique may be a superior or complementary technique for customers only familiar with laser diffraction. And it explains why the AccuSizer® SPOS system resolution and sensitivity to distribution tails is far superior to laser diffraction.
This technical note is written to aide customers who want to verify system performance of the Nicomp® 380 or 3000 series systems.
This paper takes a closer look at ways to more comprehensively meet increasing purity specifications throughout chemical and device manufacturing.
This paper takes a closer look at ways to more comprehensively meet increasing purity specifications throughout chemical and device manufacturing.
Explains how our AccuSizer® SPOS system is an ideal technology for determining aggregated protein size and concentration in particles/mL for sizes greater than 150 nm. And how it is designed to meet and exceed all requirements in USP <787> subvisible particulate matter testing.
Explains why the AccuSizer SPOS system is the preferred method to accurately determine the size and concentration of microbubbles used in various ultrasonic molecular imaging procedures, which is critical to imaging quality and patient safety.
This paper addresses the challenges of bulk drug substance (BDS) storage, shipping, and other critical factors users must consider in deciding whether and how they will adopt single-use technology.
Featuring the AccuSizer® A9000 FX Nano and AD system dual sensor particle counters, and the A9000 SIS syringe injection system for extended dynamic range down to 150 nm.
Explains how our AccuSizer® SIS syringe injection system is designed to meet and exceed all requirements in USP <787> Particulate Matter in Therapeutic Protein Injections test.
The AccuSizer® mini monitoring system allows for continuous, no dilution, monitoring of CMP slurries at operating conditions. The reduced footprint saves valuable space in your laboratory.
The SmartProbe® dispense connector offers mechanical and electronic misconnect prevention. Designed for use with the NOWPak® liner-based bottle system and used in conjunction with the SmartCap™ closure, it snaps into place only when the connector and closure key codes match.
Detailed procedures for properly filling, capping, and sealing NOWPak® bottle system one-liter assemblies, and NA-11-01-6 UN box preparation, loading, and box-sealing instructions.
Overview of our AccuSizer® FX, FX Nano, Mini FX, and Mini FX Nano systems that use the method of single particle optical sizing (SPOS) to quickly count and size a large number of particles, one at a time, constructing a true particle size distribution.
Overview of our Nicomp® N3000 particle analyzer that can be integrated into many nanoparticle processes, providing real-time particle size distributions. Using dynamic light scattering (DLS) technology, this online system couples a compact optics bench with our unique autodilution fluidics, all rugged enough for the production environment .
Utilizing dynamic light scattering (DLS) technology, you can now measure nanoparticles 1 nm - 1 µm continuously with the Nicomp® online system.
The ErgoNOW™ bottle system connector keyed retainer prevents misconnects when dispensing material using the ErgoNOW connector and the matching key-coded SmartCap™ or IntelliCap™ closure, ensuring the correct material is dispensed.
Comprehensive listing of graphite grades manufactured by Entegris, which are segmented by grain size. It includes 1, 5, and 10 micron, which are further segmented by application. Sold in bulk form or as as custom machined components for specific applications.
Pictorial that explains the advantages of single-layer fluoropolymer bags in the cold-chain vs. multilayer bags, and how Aramus™ single-use bag assemblies can withstand gamma irradiation and cold chain temperatures down to -196°C.
After chemical has been dispensed, the SmartCap™ closure plug is used to seal the SmartCap breakseal opening and safely secure residual chemical within the NOWPak® liner-based bottle system prior to disposal.
This particle analyzer has an integrated microplate reader for performing particle count and size analysis. Automated USP <787> calculations are reported along with detailed size distribution, if desired.
Learn how UN rated boxes help protect filled NOWPak liner-based system bottles when shipping hazardous chemicals.
The high-viscosity dispense connector is an innovative delivery solution for high-viscosity chemical, representing Entegris’ next generation connector offering.
Pre-cleaned, FEP diptube assembly for NOWPak Liner-based Canister Systems
This application note explains using our AccuSizer® liquid particle counter to qualify the cleanliness of our Aramus™ single-use 2D bag assemblies.
Learn how to select the best polymetric film for single-use bioprocessing downstream applications.
Partikelzählung zur Sicherstellung der OberflächenreinheitDie Reinheit von Teilen oder Behältern ist wichtig, um das Vorhandenseinvon Verunreinigungen durch Partikel zu vermeiden, die dieQualität oder Leistung beeinträchtigen können.
Test de comptage des particules pour garantir la propreté des surfacesLa propreté des pièces ou des boîtiers est importante pour éviter laprésence d’une contamination particulaire qui peut nuire à la qualitéou aux performances.
The small, disposable filter has a black polypropylene shell that has a light-blocking effect during filtration of inks and other photosensitive materials."
The Cynergy process tee valve has a close-coupled branch to reduce dead leg and entrapment potential, while ensuring drainability and eliminating potential bacteria growth areas.
Detailed instructions for how to properly assembly Cynergy® PVDF tube adapter fittings.
Focusing on materials that enable single-layer storage solutions, this paper looks at plastic storage bags for bioprocessing applications, their challenges, and technology developments to address these challenges.
This brochure identifies entire system solutions developed to help you meet increasing purity specifications throughout chemical and device manufacturing.
Detailed instructions for properly mounting and assembling ½”, 1” and 2” Cynergy pneumatic and manual valves. Includes guidelines for drain angles, gaskets, and clamps.
The NC-W2 closure provides a seal for filled 1 to 20 liter NOWPak liner-based bottle systems and NOWPak liner-based canister systems with 63 mm buttress thread.
Cold temperature performance demonstration of Aramus™ film versus polyethylene and polyolefin film.
Single-Use Bag Permeability Testing in Cryopreservation Conditions
The NA-46-250 shipping ring is placed over NOWPak® closures after they are sealed onto filled NOWPak bottles
Detailed instructions for correctly assembling a Cynergy clamp connection.
Learn how utilizing advanced fluoropolymer materials in single-use systems offers distinct advantages in regards to extractables, chemical compatibility, and cold temperature performance.
The stability of frozen solutions stored in single-use bags is a primary concern in bioprocessing. This presentation will share pH stability data from a frozen solution stored in single-use bags with different gas permeation rates that are subjected to CO2 gas from sublimating dry ice.
The NCV-200-T shipping cap and NCV-200-B closure protect critical high-viscosity materials within filled canister systems.
The NA-110-50 shipping ring is placed over the NCD-AA-AA dispense closure after it is sealed onto filled NOWPak bottles.
Detailed instructions for properly flaring and assembling Cynergy clamp-to-Flaretek adapters.
A part number guide for selecting the right 55 gallon (200 liter) trilayer HDPE drum that is manufactured in Taiwan.
A part number guide for selecting the right 55 gallon (200 liter) Advantage trilayer HDPE drum that is manufactured in Taiwan.
A part number guide for selecting the right 55 gallon (200 liter) Advantage trilayer HDPE drum.
A part number guide for ordering the right single-use trilayer HDPE drum.
A part number guide for ordering the right 46 gallon (175 liter) PFA/PE composite drum.
A part number guide for ordering the right 5 gallon (20 liter) PFA/PE composite pail.
A part number guide for ordering the right 46 gallon (175 liter) PE/PE composite drum.
A part number guide for ordering the right 500, 800 or 1200 liter IBC.
NOWPak® NC-X1* Liner-based Bottle System breakseal closures are used to seal bottles after they are filled with chemical.
Detailed instructions for properly assembling Cynergy clamp adapters to butt-weld Schedule 40 PFA PureBond® pipe.
The only HDPE drum on the market approved to transport UN Packing Group I chemicals.
A part number guide for selecting the right trilayer HDPE drum for use with Packing Group 1 chemicals.
A part number guide for selecting the right Advantage trilayer HDPE drum for use with Packing Group 1 chemicals.
The information in this overview is provided for the purpose of communicating regulatory compliance for Aramus single-use bags and assemblies as shipped from an Entegris location.
Step-by-step instructions for replacing o-rings in the Sentry QCIII quick connect dispense head.
Step-by-step instructions for replacing o-rings in the Sentry QCIII quick connect shipping cap.
The NCD-AA-AA dispense closure can be used with the NOWPak® Liner-based Bottle Systems or PDMPak® System for Pressurized Applications for filling, sealing, shipping, connecting, and dispensing chemical.
This article examines data from pilot-scale testing of the Aramus single-use bag system for freeezing, storage, and shipping of formulated bulk biologics.
The new standard in all-fluoropolymer filters for aggressive chemicals and moderate temperatures
NOWPak replacement liners can be damaged if not handled properly. This procedure outlines the correct way to remove the liners from the shipping box in order to reduce inadvertent damage.
The filter cup fits on NOWPak® ND-LD type dispense connector diptubes made of 3/8” outer diameter FEP or PFA tubing.
This article explains how fluoropolymers that have low or non-existent fillers, additives and processing agents are better suited to more aggressive, material-specific extraction methods.
This article explores various concentration measurement technologies, and explains why IoR has great potential for real-time, inline measurement of process fluid concentrations.
Index of refraction improves process analytical technology (PAT) in biopharmaceutical manufacturing.
Learn how index of refraction monitors provide information in real time, allowing for fast response to variations in biopharmaceutical downstream and purification processes.
This article explores the acceptance of Single Use Systems (SUS) in bioprocessing applications used in the biopharmaceutical industry.
Overview showing how Cynergy® Weld-in-Place™ equipment is easy to use and performs repeatable, precise beadless welds while installing your Cynergy PFA process system.
This video demonstrates our easy-to-use Cynergy® weld-in-place™ equipment that performs repeatable, precise beadless welds. This weld equipment minimizes downtime, cross contamination, and your time to market.
Read how polymer components and systems are helping drug companies improve their manufacturing flexibility, reduce operating costs and capital spending and shorten their time to clinical trials.
The Sentry® QCIII Quick Connect System is the safest and easiest method of connecting FluoroPure® chemical containers with typical bulk chemical delivery systems. This patented connection system is key coded and uses Entegris' industry leading Flaretek® seal for the main chemical dispense line and radial seals for the remaining three ports. This new system allows the connection to be made without realigning key codes.
This instruction sheet provides general guidelines for Cynergy® valve diaphragm replacement.
View our comprehensive portfolio of the only all-Teflon® PFA system capable of withstanding steam-in-place (SIP) and clean-in-place (CIP) cycles.
High-purity, chemically inert PFA dip tubes for biopharm sparging, CIP sprays, chemical addition and dispense
Video demonstration of the functionality of various shipping caps used on Sentry® QCIII drum inserts.
Video demonstration of how to replace the shipping cap o-ring in the Sentry® QCIII quick connect system.
Video demonstration troubleshooting why you may have bubbles in your point-of-use line.
Video overview of the Sentry® QCIII quick connect system - the industries safest and easiest method of connecting FluoroPure® chemical containers with bulk chemical delivery systems.
Video demonstration of the rigorous DOT UN testing that FluoroPure® chemical containers and Sentry® QCIII quick connect systems undergo.
Video demonstration of how to replace the dispense head o-ring in the Sentry® QCIII quick connect system.
Video demonstration of how to disassemble the Sentry® QCIII quick connect system.
Video demonstration of how to assemble the Sentry® QCIII quick connect system.